|
| The Dutch in ATLAS | | The representatives of Veerman Beheer company, the new client of ATLAS GROUP from the Netherlands, visited our plants. The visitors tested our cementitious products as well as gypsum ones. |
| ATLAS purchased the plant in Grodno (Belarus). | | ATLAS purchased majority stake of private enterprise Tajfun- the major manufacturer at the building sector in Belarus. Thanks to that investment ATLAS has strengthen its position in the Eastern market. ATLAS and Tajfun shall invest ca. 4 million USD for the modernization and manufacture development, within the next two years. |
| Atlas sells again in Dubna- Moscow Region | | Atlas Group reopens Sales Office in Dubna, in the 15th of September. Thus, after three years break, the direct sales of Atlas products in Russia has been reactivated. |
| The quality and environmental protection in one system together | | We have received the approval that Atlas company has implemented and respect an integrated system of the quality and environment management conforming with DIN-EN ISO 9001:2000 and DIN-EN ISO 14001:2005. The certificates were issued of July 2, 2008. We are one of the few companies in branch, possessing an integrated system of management. |
| Atlas is getting dressed the Lithuanians | | 'The best cloth for home' that is the slogan of the year for Atlas insulating system promotional campaign in Lithuania |
|
|
|
|
|
|
AVAL KT 28 Mortar for tradidtional masonry work
for walls made of bricks, hollow bricks and other similar ceramic, concrete or lime-sand materials
suitable for masonry work of above-ground storeys as well as cellar walls and foundations
Properties
very easy and convenient to use and is characterised by high plasticity and good adhesion.
possibility of work in reduced temperatures
Main parameters
consumption: 72 kg/ m2/ for wall thickness of 1/2 brick
joint thickness: 6-40 mm
compressive strength: M5 category |
|
|
|
|
|
|
AVAL KT 111 Traditional cementitious plaster
designed for making traditional plasters of 0 to III grade, interior and exterior.
on surfaces made of bricks, blocks, hollow bricks and other similar ceramic or lime-sand materials
Properties
for manual or mechanical application
Main parameters
layer thickness:6 - 30 mm
consumption: 25 kg/ 1.3-1.4 m2/ 10 cm layer thickness
compressive strength: CSII category |
|
|
|
|
|
|
|
|
